Hello to the forum.
Long and complicated tale but need help to convert the wired speaker out on a Technics SU-Z45 amplifer to either RCA or a 3.5mm jack to connect bluetooth speakers.
The AMP has the following output spec: Power output: 35 watts per channel into 8Ω (stereo). Output: 150mV (line). Speaker load impedance: 4Ω to 16Ω
The bluetooth is to be connected from the AMP to a TaoTronics Portable Wireless Stereo Music Transmitter http://www.amazon.co.uk/gp/product/B00Q2EGQQU?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s0
This works absolutely fine from an old iPOD using the 3.5mm. Tried wiring the AMP direct but sound was awful and low, then tried a two channel high to low level line convertor which presents as RCA but have no sound at all.
I know the AMP is circa 1982 but it does work but there is no longer space for wired speakers.
Any help much appreciated.
Long and complicated tale but need help to convert the wired speaker out on a Technics SU-Z45 amplifer to either RCA or a 3.5mm jack to connect bluetooth speakers.
The AMP has the following output spec: Power output: 35 watts per channel into 8Ω (stereo). Output: 150mV (line). Speaker load impedance: 4Ω to 16Ω
The bluetooth is to be connected from the AMP to a TaoTronics Portable Wireless Stereo Music Transmitter http://www.amazon.co.uk/gp/product/B00Q2EGQQU?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s0
This works absolutely fine from an old iPOD using the 3.5mm. Tried wiring the AMP direct but sound was awful and low, then tried a two channel high to low level line convertor which presents as RCA but have no sound at all.
I know the AMP is circa 1982 but it does work but there is no longer space for wired speakers.
Any help much appreciated.
Facebook
Twitter
Instagram