svs pb 2000 pro vs 2x sb 1000 pro

[hardcore_gamer29]

So when you add a second sub, what does the frequency response look like?

let me try i did not forgot it thank you

 

[hardcore_gamer29]

**** after 2nd subwoofer its still same

 

[hardcore_gamer29]

So when you add a second sub, what does the frequency response look like?

exact same

 

[giggsy1977]

Obviously those are predicted responses, but you'll need to move the second sub around a bit to balance out the nulls and peaks in the room so wherever you're sat (within reason) the bass response is consistent.

 

[hardcore_gamer29]

Obviously those are predicted responses, but you'll need to move the second sub around a bit to balance out the nulls and peaks in the room so wherever you're sat (within reason) the bass response is consistent.

cant do that as i dont have space for this big subwoofer. my room is only 11.70x10.70 feet

 

[giggsy1977]

Can you use the Parametric EQ on the SVS app to raise the frequency where you have a null?

 

[hardcore_gamer29]

Can you use the Parametric EQ on the SVS app to raise the frequency where you have a null?

i did it already but it makes bass very bad. deepness of bass is ruined

 

[giggsy1977]

Hmm, I would have thought careful manipulation of the frequencies and gain around 80hz would have helped. Bother. Hmm, tough one to sort it seems.

 

[hardcore_gamer29]

Hmm, I would have thought careful manipulation of the frequencies and gain around 80hz would have helped. Bother. Hmm, tough one to sort it seems.

80hz dip may be because of speaker crossed at 80hz

 

[giggsy1977]

You have the LFE crossover set to 120hz and the speaker crossovers at 80hz?

 

[hardcore_gamer29]

You have the LFE crossover set to 120hz and the speaker crossovers at 80hz?

yes lfe default at 120hz in avr

 

[hardcore_gamer29]

80hz speaker cross is greyed out as managed by dirac bass control