LPF for LFE

lussen

New member
Nov 28, 2009
34
0
0
Visit site
run audyssey denon1910 its say front& centre full band + surround & front height 80hz.what should i set speaker crossover freq and LPF for LFE freq setting.i found from audyssey web site say always set LPF for LFE at 120hz.denon1910+ms aviano2 front_aviano 5centre_sr ms avant903i_sub velodyne impact10 .
 

JohnHolmes

New member
Mar 6, 2009
31
0
0
Visit site
Audyssey always sets up the crossovers wrong on my M&K 750s.

I always have to return them to 80hz, sometimes sets them at 100 or 110.
 

Ronald Archiebald

New member
Jun 24, 2010
63
0
0
Visit site
Audyssey also tends to set all speakers to 'Full Band', i.e. Large, regardless if they are bookshelf or floorstanders.

Further manual adjustments are therefore always required.
 
A

Anonymous

Guest
I found the best setting for my setup is to set all at small and crossover at 80HZ for rear and centre and 60Hz for the fronts. the lpf for lfe i set it 120HZ. Hope it Helps.
 

TRENDING THREADS

Latest posts