Monitor Audio Silver 100 7G Odd Info

[Daniel_son0]

Just curious if anyone could provide me with the diameter of the binding posts on the Silver 100 7G speakers (where a spade connector would interface with)?

Ideally want to get some jumper cables ordered so they arrive at a similar time to the speakers.

Many thanks in advance! 🙂

 

[Al ears]

Just curious if anyone could provide me with the diameter of the binding posts on the Silver 100 7G speakers (where a spade connector would interface with)?

Ideally want to get some jumper cables ordered so they arrive at a similar time to the speakers.

Many thanks in advance! 🙂

Why jumpers, just use single wired.
Unless you intend to bi-amp of course....

 

[Daniel_son0]

Why jumpers, just use single wired.
Unless you intend to bi-amp of course....

Don’t want banana plugs bottoming out on the inserted wire in the thru holes.

 

[Al ears]

Don’t want banana plugs bottoming out on the inserted wire in the thru holes.

OK,
So you want speaker cables terminated with spades.
I still don't see why you need jumper cables

 

[abacus]

They come as staandard with links, and chaging to jumpers will make no diffrence whatsoever.

Bill

 

[Jasonovich]

Just curious if anyone could provide me with the diameter of the binding posts on the Silver 100 7G speakers (where a spade connector would interface with)?

Ideally want to get some jumper cables ordered so they arrive at a similar time to the speakers.

Many thanks in advance! 🙂

I hope I understood you correctly. By my calculations the binding post diameter is 2.4cm or 24mm. See below

I suspect that would be the measurement of the outer binding post (plastic cover), I suspect the metal core diameter is approximately 10mm or less.

 

[nopiano]

I hope I understood you correctly. By my calculations the binding post diameter is 2.4cm or 24mm. See below

I suspect that would be the measurement of the outer binding post (plastic cover), I suspect the metal core diameter is approximately 10mm or less.

View attachment 7960

Speaker spades don’t fit on the plastic, for heavens sake!

The most common spades are 6mm or 8mm. Monitor Audio will surely tell the OP upon enquiry. (US products like Audioquest state 1/4” or 5/16” which I believe is pretty much the same. )

 

[Jasonovich]

Speaker spades don’t fit on the plastic, for heavens sake!

The most common spades are 6mm or 8mm. Monitor Audio will surely tell the OP upon enquiry. (US products like Audioquest state 1/4” or 5/16” which I believe is pretty much the same. )

Sorry I didn't explain it well. I was merely working out the measurement. Not saying you fit the spade on the outer plastic. 😜
Yes the core copper diameter is about 8mm .