Monitor Audio Silver 100 7G Odd Info

[Daniel_son0]

Just curious if anyone could provide me with the diameter of the binding posts on the Silver 100 7G speakers (where a spade connector would interface with)?

Ideally want to get some jumper cables ordered so they arrive at a similar time to the speakers.

Many thanks in advance! 🙂

 

[Al ears]

Just curious if anyone could provide me with the diameter of the binding posts on the Silver 100 7G speakers (where a spade connector would interface with)?

Ideally want to get some jumper cables ordered so they arrive at a similar time to the speakers.

Many thanks in advance! 🙂

Why jumpers, just use single wired.
Unless you intend to bi-amp of course....

 

[Daniel_son0]

Why jumpers, just use single wired.
Unless you intend to bi-amp of course....

Don’t want banana plugs bottoming out on the inserted wire in the thru holes.

 

[Al ears]

Don’t want banana plugs bottoming out on the inserted wire in the thru holes.

OK,
So you want speaker cables terminated with spades.
I still don't see why you need jumper cables

 

[abacus]

They come as staandard with links, and chaging to jumpers will make no diffrence whatsoever.

Bill

 

[Jasonovich]

Just curious if anyone could provide me with the diameter of the binding posts on the Silver 100 7G speakers (where a spade connector would interface with)?

Ideally want to get some jumper cables ordered so they arrive at a similar time to the speakers.

Many thanks in advance! 🙂

I hope I understood you correctly. By my calculations the binding post diameter is 2.4cm or 24mm. See below

I suspect that would be the measurement of the outer binding post (plastic cover), I suspect the metal core diameter is approximately 10mm or less.