Question KEF S2 stands alternative?

[joeyd2548]

I just bought a pair of lightly used KEF LS 50 Meta speakers for $900, and I WOULD LIKE TO AVOID SPENDING another $450 for the S2 metal stands made by KEF to support the speakers. The LS 50 Metas have four bolt holes, 1 in each bottom corner to connect the speakers to the stands.

Does any other manufacturer make stands that will match up with these holes? Any ideas would be appreciated.

Thanks in advance,
Joe in Florida

 

[Al ears]

Welcome to the forum.
Cannot think of any that would match up but be aware that you don't necessarily have to bolt them to stands even if they do have holes there to do that.
Some would say it's better to isolate them from their stands.

 

[daytona600]

$479 made in USA should be better than chinese Kef stands

KEF LS50 Speaker Stand — Sound Anchors

KEF LS50 Speaker Stand from Sound Anchors for top quality sound performance.

www.soundanchors.com

 

[Gray]

I WOULD LIKE TO AVOID SPENDING another $450 for the S2 metal stands

I don't blame you.
Drill holes through existing or cheaper new stands.
You can always cover the holes in the future if necessary (if you could even see them).

 

[Al ears]

I don't blame you.
Drill holes through existing or cheaper new stands.
You can always cover the holes in the future if necessary (if you could even see them).

That was going to be my next suggestion if OP simply has to bolt them down.

 

[Al ears]

$479 made in USA should be better than chinese Kef stands

KEF LS50 Speaker Stand — Sound Anchors

KEF LS50 Speaker Stand from Sound Anchors for top quality sound performance.

www.soundanchors.com

Doesn't look like those have bolt holes.....

 

[Messiah]

Doesn't look like those have bolt holes.....

And pretty sure $479 is more than $450...

😁

 

[Al ears]

And pretty sure $479 is more than $450...

😁

And it's 'from $479' correct height ones more likely around $490

 

[nopiano]

I don’t know Florida but if your local social media sales groups or eBay offers have something suitable they are by far the thriftiest way to buy what you need.

A KEF dealer might have some tucked away and willing to discount too. Stands often get scuffed in a store, so can’t be sold as new.

LS50 don’t need to be bolted to anything, unless you have pets or children who can’t be trusted. They also have great dispersion so can tolerate slightly lower or taller stands than KEF’s own.