jamo subwoofer set up.

[MRAlan]

Hi All,
I know this question has been asked before but after my resarch there seems to be different answers. :~

Some say Phase on full will others say 0

What would you reccomend for the subwoofer seetings.
Phase ??
Frequency??
Auto/On ??
Level??

It is conncted up to a Onkyo SR607. So obviously will be using the Audessy set up.

Thanks in Advance.
Alan

 

[alfredd]

Since you are using Audyssey, you may set up your Jamo as follows:

Phase: 0
Crossover frequency : Max ( or 120 hz)
Auto/On: On for the calibration, and Auto afterwards.
Level: Depnds on size of room, distance to listening position. 12' o clock is a good starting point. Ensure that Audyssey is not setting levels to +- 12 db or more. If Audyssey sets sub level below -12 db, turn up the level knob a notch and re- calibrate.

 

[MRAlan]

Thanks Alfred..

Alan