Question How to plug an electro acoustic guitar into a hifi system

Din5

Well-known member
Jun 27, 2021
106
64
4,670
Visit site
I think you only need to buy an adapter - read this interesting thread :-

 
  • Like
Reactions: cookiemonsteruk

Din5

Well-known member
Jun 27, 2021
106
64
4,670
Visit site
For the cost of the adapter, its probably worth a try.
I remember in my school days, someone lent me an electric guitar, it worked when plugged into my dad's Boots Stereo Record Player - 2.5Watt. I must have rigged-up my own adapter to connect to the DIN socket on the Boots.
I can't remember the sound quality, but it certainly worked and served it's purpose at the time.
 
  • Like
Reactions: cookiemonsteruk

clanking

Well-known member
Feb 6, 2023
32
17
545
Visit site
You're best off getting an audio interface and connecting its outputs to the amps RCA. You don't have to spend much. A Behringer UM2 will probably do the job.

I found with my electric guitars through a Helix in to a UM204HD that I was better off with powered monitors,so I sold my Wharfedales and NAD amp.
 

cookiemonsteruk

Active member
Jul 14, 2024
21
7
25
Visit site
You're best off getting an audio interface and connecting its outputs to the amps RCA. You don't have to spend much. A Behringer UM2 will probably do the job.

I found with my electric guitars through a Helix in to a UM204HD that I was better off with powered monitors,so I sold my Wharfedales and NAD amp.

@clanking intriguing . Guitar has xlr as well as rca. I take it that takes the place of the y adapter with the cable from guitar goes to xlr or inst/rca and then two more rca's go from the back of the module to the rca inputs on the hifi. Fantastic , many thanks 😁
 

Gray

Well-known member
Guitar has xlr as well as rca.
It seems that your particular guitar has a built in preamp - I saw it mentioned that the XLR can be connected to a mixing desk .

Mixing desks accept balanced XLR signals from microphones and line level sources - so you need to confirm the millivolt output from the XLR to be sure that it (probably is) at line level and therefore suitable for connection (via adaption) to the analogue RCA input on your Marantz.

Any guitar / preamp literature you have might give you the output level details.
 
Last edited:

TRENDING THREADS

Latest posts