Question How to plug an electro acoustic guitar into a hifi system

[cookiemonsteruk]

Background i have a marantz mcr6)12 and wharfedale diamond 9.1 speakers

Is it possible to play my washburn festival ea15 through it. What else would i need to buy

 

[Din5]

I think you only need to buy an adapter - read this interesting thread :-

How To - How to Connect a Guitar to Your Audio System

Have you ever felt the need to ramp up the volume of your guitar strumming? You can connect your electric guitar to your audio system to truly ‘hear’ your own music during your home practice sessions. It is as safe as it is easy. This tutorial will walk you through the steps required to connect...

forums.whathifi.com

 

[cookiemonsteruk]

Thanks, Very interesting. I assume the rca input size is standard. I will need to check tomorrow 👍

 

[cookiemonsteruk]

@Din5 although the poster of the how to was berated for that article 😁 its still an interesting read. Might buy a proper amp in the end

 

[nopiano]

@Din5 although the poster of the how to was berated for that article 😁 its still an interesting read. Might buy a proper amp in the end

I commented in the original thread. It’s wrong at Step 1. You turn on the amp last, not first. That tells you all you need to know about ignoring the rest!

 

[Din5]

For the cost of the adapter, its probably worth a try.
I remember in my school days, someone lent me an electric guitar, it worked when plugged into my dad's Boots Stereo Record Player - 2.5Watt. I must have rigged-up my own adapter to connect to the DIN socket on the Boots.
I can't remember the sound quality, but it certainly worked and served it's purpose at the time.

 

[clanking]

You're best off getting an audio interface and connecting its outputs to the amps RCA. You don't have to spend much. A Behringer UM2 will probably do the job.

I found with my electric guitars through a Helix in to a UM204HD that I was better off with powered monitors,so I sold my Wharfedales and NAD amp.

 

[cookiemonsteruk]

You're best off getting an audio interface and connecting its outputs to the amps RCA. You don't have to spend much. A Behringer UM2 will probably do the job.

I found with my electric guitars through a Helix in to a UM204HD that I was better off with powered monitors,so I sold my Wharfedales and NAD amp.

@clanking intriguing . Guitar has xlr as well as rca. I take it that takes the place of the y adapter with the cable from guitar goes to xlr or inst/rca and then two more rca's go from the back of the module to the rca inputs on the hifi. Fantastic , many thanks 😁

 

[cookiemonsteruk]

@clanking consider you post marked answer as i can't find how to mark it

 

[Gray]

Guitar has xlr as well as rca.

It seems that your particular guitar has a built in preamp - I saw it mentioned that the XLR can be connected to a mixing desk .

Mixing desks accept balanced XLR signals from microphones and line level sources - so you need to confirm the millivolt output from the XLR to be sure that it (probably is) at line level and therefore suitable for connection (via adaption) to the analogue RCA input on your Marantz.

Any guitar / preamp literature you have might give you the output level details.

 

[Gray]

the poster of the how to was berated for that article

He was - and rightly so.
I'm surprised that article has not been deleted for the benefit of everybody.

 

[Revolutions]

This will sound terrible. Please don’t do it.

 

[Deliriumbassist]

He was - and rightly so.
I'm surprised that article has not been deleted for the benefit of everybody.

Because it can mean more website hits. As I said then, I'll say it again - Search Engine Optimisation.