- Aug 10, 2019
- 2,556
- 4
- 0
Recently bought a new top of the range HP laptop with HDDVD player and HDMI out. loads of memory and processing power.
I usually watch DVDs via HDMI from my arcam DV79. connected it up to my Pioneer 505XDE plasma and looking forward to watching some HiDef Jason Bourne action on HD DVD(came free with the laptop) ......it was very poor. running the laptop out of windows as instructed (has a quick boot called "quickplay" which prevents loading up of windows and allows full use of memory and processing for media playback. HiDef via my xbox360 (all being composite input) is usually lovely.
via HDMI colour was extreme and screen continually flickered. frame rate would spontaneously drop to unwatchable. despite using the setup options with the player and the plasma basically unwatchable and certainly not as nice to look at as with the old DVD playing back through my arcam (I had the DVD already). optical ouput of sound to the amp gave good 5.1 sound.
slight improvement using VGA in PC mode outputting to the plasma running at 1280 x 768 resolution (optimal for plasma) rather than HDMI - although colour now "normal" and flickering able to be stopped by setting plasma to "game" mode rather than "movie" that I usually use (except when using the XBOX360) there are still issues with frame dropping to level that is unwatchable.
all very disappointing and have not rushed out to buy more HD DVDs!!!
Any ideas how to sort this if it is sortable? is it an laptop issue or is it the plasma I wondered if there is "too much processing" going on as I know that the plasmas reprocess the information. is it just a crap HD DVD player? seems annoying if they can seel a system which basically doesnt work. any advice would be appreciated.
regarding the plasma does anyone know why the pioneer identifies odd resolutions such as when playing the xbox360 at 720p identifying the image at 750p and standard DVD playback via HDMI as 625?
the plasma seems fine being used as computer monitor in PC mode(playing back video recorded in windows media centre (XP) via VGA and for playing games that way as long as resolutions of 1024x 768 or 1280 x768 are set on the laptop output as per instructions.
In the instructions for the plasma in the section under HDMI there is a note saying "PC signals are out of correspondence" can anyone translate and is that causing the probelms with the HDMI
I wondered if anyone else has tried this sort of setup or had similar issues with this sort of kit?
I usually watch DVDs via HDMI from my arcam DV79. connected it up to my Pioneer 505XDE plasma and looking forward to watching some HiDef Jason Bourne action on HD DVD(came free with the laptop) ......it was very poor. running the laptop out of windows as instructed (has a quick boot called "quickplay" which prevents loading up of windows and allows full use of memory and processing for media playback. HiDef via my xbox360 (all being composite input) is usually lovely.
via HDMI colour was extreme and screen continually flickered. frame rate would spontaneously drop to unwatchable. despite using the setup options with the player and the plasma basically unwatchable and certainly not as nice to look at as with the old DVD playing back through my arcam (I had the DVD already). optical ouput of sound to the amp gave good 5.1 sound.
slight improvement using VGA in PC mode outputting to the plasma running at 1280 x 768 resolution (optimal for plasma) rather than HDMI - although colour now "normal" and flickering able to be stopped by setting plasma to "game" mode rather than "movie" that I usually use (except when using the XBOX360) there are still issues with frame dropping to level that is unwatchable.
all very disappointing and have not rushed out to buy more HD DVDs!!!
Any ideas how to sort this if it is sortable? is it an laptop issue or is it the plasma I wondered if there is "too much processing" going on as I know that the plasmas reprocess the information. is it just a crap HD DVD player? seems annoying if they can seel a system which basically doesnt work. any advice would be appreciated.
regarding the plasma does anyone know why the pioneer identifies odd resolutions such as when playing the xbox360 at 720p identifying the image at 750p and standard DVD playback via HDMI as 625?
the plasma seems fine being used as computer monitor in PC mode(playing back video recorded in windows media centre (XP) via VGA and for playing games that way as long as resolutions of 1024x 768 or 1280 x768 are set on the laptop output as per instructions.
In the instructions for the plasma in the section under HDMI there is a note saying "PC signals are out of correspondence" can anyone translate and is that causing the probelms with the HDMI
I wondered if anyone else has tried this sort of setup or had similar issues with this sort of kit?