Denon Avr 1400 h - no headphone output

Do those headphones work when plugged into anything else with a headphone socket?
I mean are you sure the headphones themselves are fine.
More likely you need to set the headphone output level manually, check the manual....
 
Last edited:

gianry

Member
Nov 21, 2022
8
0
20
Visit site
only one thing, I need to use an adaptor like this as my headphone have 3,5 mm jack :
adattatore_cuffie_jack.jpg
 

Gray

Well-known member
I've measured the resistance on the two channel pins ; both headphones I own are 2,1k ohm .
If they work on your PC and i-pad, then clearly they would work on your Denon (if there is actually an output on its socket).

(By the way, recheck your measurements:
On your TRS plug, going from the pointed end you've got Tip, Ring and Sleeve.
Your 2 resistance probes go on tip and sleeve to measure left - and ring and sleeve to measure right driver - each a bit less than 2.1 k ohms now surely?)
 

gianry

Member
Nov 21, 2022
8
0
20
Visit site
You are right ; the resisteance of the mic is 2.1 k ohm . The resistance of the drivers is more less .

I ve used the headphone with adaptator on a c’è player and works .

Now I’m sure the denon has a defect

could it be only a connector failure
 

TRENDING THREADS

Latest posts