Hi Strapped
I use the 3D3 - excellent glasses they really are.
I used the C3 masking taped the glasses to it and gently rested it on the screen - I checked to make sure there would be no damage but the glasses are soft and rubbery in the farmes so it was ok.
In terms of strong blue - only in some of the lower registers 20,30 and 40. I had to take blue out loads in the 2 point, but found myself boosting blue in the 10 point for the higher ires - 50 upwards.
Out of the box the results were horrific! I cant beleieve I was watching it like that - I am disgusted with myself
My Cal is far from perfect, I had a really good cal - but I tried to tweak it at the lasty stage and ruined it - and couldnt be bothered to go back and fix it I was desperate to try it and it was late.
I know I cna improve it, but i think the improvement now would be very minor and I think an i1 would allow a better cal.
I dont get very good readings at 10ire - did your calibrator get good readings there on his i1?
Was he using this? http://www.wexphotographic.com/buy-x-rite-i1-display-pro/p1526088?cm_mmc=googlebase-extension-_-colour-management-_-colour-management-_-x-rite-i1-display-pro_1526088&utm_source=googlebase-extension&gclid=cowmqzjq_rccfabltaod5zaa7q
Even with the cal as it is I am amazed at what I was seeing - True 2D calibrated quality image only in 3D - its jaw dropping stuff mate!
The beginning of titanic was blowing my mind - and the detail now I have a good greyscale is ridiculous!.
The greyscal with the excception of 10 and 20 are all very low - 2 and below. 20 is about 3 and 10 is higher about 5.
I had 20 mega low as well but it seems like after altering the cms colout it affected the greyscale quite a lot which I didnt expect.
I should have gone back and sorted it out but another time if I feel the urge to achieve perfection