Magnum Opus:
this is where I'm heading with my system .
To a Denon 2309 I have added the Nait xs . I have exchanged my fronts with Spendor a6's and put the fronts at the back - B and W 685's
I have connected the Denon to the Nait via the front and left pre outs on the Denon 2 rca to 5 pin din , then flicked the Unity gain av by pass on the Nait to achieve synergy . I want the best stereo sound via the Nait and Naim cd 5x to Spendor a6 's - a great combo , and then I want to integrate the fronts with the rears centre and sub which are running off the denon avr . In theory this is possible...
But I am having serious noise from my front speakers whenever I engae the av input function on the Nait xs - go the stereo route and all is well, marvelously so , try 5.1 and I get nothing but noise from the fronts . The rears are fine and the centre
Any ideas out there do I need to recalibrate the system using Audyssey ? What's the noise interference to do with ?
Cheers
This sounds like the problem I had with my old Creek Evo. I found out that the Evo does not allow you to separate pre and power and all I got was a crackling noise from the fronts. However, as the Naim has an AV option, I can't see how it can be that.