Wharfedale 10.1 speaker problems

[admin_exported]

Hi.

I recently bought a pair of Wharfedale Diamond 10.1 speakers to connect to my Denon AVR 1912.

I noticed that the left speaker output volume is far lower than the right one. In fact after setting up the system with Audyssey, the amplifier set the left speaker with +3,5dB while all the others have -dB settings. Can anyone tell me what might be causing this? One time when running the setup with Audyssey, the amp informed that the left speaker was out of phase. The connections are OK though. Red to red, black to black.

By the way, the 10.1 speakers do not have any reference as to they should be place as the right or left speaker. Is it all the same with this model?

Thanks in advance

 

[f1only]

Possibly the speakers distance from the Audyssey test microphone / main listening position may have a lot to do with it.

 

[Big Chris]

Swap the speakers around, see if Audyssey still wants to add DB to the same channel or if it swaps sides.