Should i turn off my power amplifier and preamplifier or should i leave them on 24/7??

[Thorseng]

Hi everyone

Currently I am wondering if I should leave my power amplifier and preamplifier on or off. It has come to my attention when I began reading some stuff about it, but I can’t really get a satisfactory explanation.

I’ve got the Densen B200 and the B310 combo. Just if people were wondering, they have switches on the back. I also have the option of turning them into idle/standby mode. But what’s the best thing I can do?

BR

 

[podknocker]

I keep my system on 24/7 and just mute it at night. Keeping the circuits at a steady temperature all the time makes sense to me.

The only kit I would turn off when not in use would be stuff like the Music Fidelity A1 amp. This Class A model will consume and waste a lot of energy when not in use, so not good for your finances, if you do worry about this of course.

 

[gasolin]

I keep my system on 24/7 and just mute is at night. Keeping the circuits at a steady temperature all the time makes sense to me.

The only kit I would turn off when not in use would be stuff like the Music Fidelity A1 amp. This Class A model will consume and waste a lot of energy when not in use, so not good for your finances, if you do worry about this of course.

It will add some heat to the room the amp is in but is a class a amp worth it, mabye not

Many moderen amps have aut standby just use that and make it aut go into standby, i don't since i wanna do it manually

My amp def adds heat to my room

 

[nopiano]

If devices have a standby setting, so that you can wake them either with a music signal or remote, then I’d switch them to standby at night. Were I not expecting to use them for longer than say 48 hours I’d turn them off completely - as you describe with your rear switch.

What do Densen say in your handbook/manual?

 

[Fandango Andy]

Hi everyone

Currently I am wondering if I should leave my power amplifier and preamplifier on or off. It has come to my attention when I began reading some stuff about it, but I can’t really get a satisfactory explanation.

I’ve got the Densen B200 and the B310 combo. Just if people were wondering, they have switches on the back. I also have the option of turning them into idle/standby mode. But what’s the best thing I can do?

BR

Generally speaking a device with a switch hidden on the back but with a standby mode would be designed to be left in standby mode when not in use. Personally if I were unsure I would contact the manufacturer and ask for their opinion.

 

[Fandango Andy]

I keep my system on 24/7 and just mute it at night. Keeping the circuits at a steady temperature all the time makes sense to me.

The only kit I would turn off when not in use would be stuff like the Music Fidelity A1 amp. This Class A model will consume and waste a lot of energy when not in use, so not good for your finances, if you do worry about this of course.

Yes, if I had a Class A amp I would be turning it off when not in use too. Have you read the specs on them? Some Krell amps use as much power on standby as a average A/B amp does while playing music.

 

[Gray]

Much newer stuff uses under half a watt on standby - so it's not as much of a (financial) issue as it might once have been.

I originally wanted the option of switching everything completely off - from the front.
So in my case, the 9 switches go to a row of rear mains sockets.

Check what the actual standby consumption of your units is, multiply that by the current unit price* of your electricity.....over time, to help you decide what to do.

* Unit price gives you 1000W for an hour.
So a half watt standby costs the same over a 2000 hour period (or almost 3 months of 24/7).

 

[Revolutions]

I’ve been experimenting with power sources recently. I wanted to leave everything in standby & use a WiFi plug to switch it all on/off.

Unfortunately my active speakers didn’t like that, one of them kept on not powering up. And now I’ve realised that my amp sometimes struggles so I have to put that on standby, then turn power off at the back.

Today I removed the WiFi plug as it’s not adding anything remotely useful 😂

 

[nopiano]

I’ve been experimenting with power sources recently. I wanted to leave everything in standby & use a WiFi plug to switch it all on/off.

Unfortunately my active speakers didn’t like that, one of them kept on not powering up. And now I’ve realised that my amp sometimes struggles so I have to put that on standby, then turn power off at the back.

Today I removed the WiFi plug as it’s not adding anything remotely useful 😂

I must admit I’d not trust a remotely switched socket to feed my Hifi. I use one for a lamp, which acts like a timer - on at dusk, off just before midnight.

For Hifi I feel reassured by having items plugged in at the wall or into a decent distribution block. I recently treated my kit to a Puritan Purist block, the one with no gubbins inside except star earthing. It’s so strong I reckon you could drive a tank over it and it would still work (not that I’m planning to do so! 🤣)

 

[Stuart83]

I’ve been experimenting with power sources recently. I wanted to leave everything in standby & use a WiFi plug to switch it all on/off.

Unfortunately my active speakers didn’t like that, one of them kept on not powering up. And now I’ve realised that my amp sometimes struggles so I have to put that on standby, then turn power off at the back.

Today I removed the WiFi plug as it’s not adding anything remotely useful

Had similar experiences when using such plugs although infrared with a remote to operate a heater, but of course it just went straight to standby mode meaning I had to get up regardless and switch it on manually.

The stupidest thing is I did the same thing with a plug in 24hr timer on a digital radio which also just went into standby mode instead of coming straight on.
That time I did subject myself to a homer Simpson slap on the head and shout "doh" 🤦

Obviously my brain forgot about standby modes on modern things and remembers when old radios etc would just go straight on.

I did redeem myself as the remote control infrared plug was very handy for an older type fan heater and light although those "ever ready plugs" don't live long as the replacements also broke after about 6 mth of daily use.

Facepalm Annoyed GIF – Facepalm Annoyed Stöhn – discover and share GIFs

Click to view the GIF

tenor.com

 

[twinkletoes]

As others have said purly depends on what we’re talking about. My sugden wouldn’t like being left on all the time ,forgetting the cost, it would drastically reduce the life of the components inside as it gets so hot.

My dac on the other hand it’s been on for nearly 8years. It has no on off switch no standby just a little 5 volt wall wart.

In all honesty even if you did turn off components completely they take seconds these days to stabilise and about 2-5mins to warm through.

 

[TrevC]

Hi everyone

Currently I am wondering if I should leave my power amplifier and preamplifier on or off. It has come to my attention when I began reading some stuff about it, but I can’t really get a satisfactory explanation.

I’ve got the Densen B200 and the B310 combo. Just if people were wondering, they have switches on the back. I also have the option of turning them into idle/standby mode. But what’s the best thing I can do?

BR

Turn them off completely. That way they will last longer.

 

[podknocker]

Turn them off completely. That way they will last longer.

I think the initial input current and 'shock' with the repeated startup of circuits could reduce their lifespan. I've mentioned something smiliar will car ignitions. Having the engine stop at lights all the time and then the huge current draw every time the engine starts again, can't be a better option than keeping the engine running. I don't have figures for either HIFI or car ignitions, but to me it makes more sense not switching sensitive electronics on and off all the time. I think the old style of light bulbs lasted longer if left on, rather than being switched on and off all the time. Electrical 'wear and tear' as opposed to both electrical and mechanical with car engines etc.

 

[Revolutions]

I think the initial input current and 'shock' with the repeated startup of circuits could reduce their lifespan. I've mentioned something smiliar will car ignitions. Having the engine stop at lights all the time and then the huge current draw every time the engine starts again, can't be a better option than keeping the engine running. I don't have figures for either HIFI or car ignitions, but to me it makes more sense not switching sensitive electronics on and off all the time. I think the old style of light bulbs lasted longer if left on, rather than being switched on and off all the time. Electrical 'wear and tear' as opposed to both electrical and mechanical with car engines etc.

Cars are built to withstand the stop/start. As are hifis.

It would be up there in the top 3 tests of “what will customers do with our product?”

 

[nads]

Mmmmmm had one unit fry itself when left in stand by as we get many micro power cuts, which would power it up. It now gets turned off. Amps seem ok on stand by though.