No sound from TV to speakers via amp

[JJ]

Hello,

Can anybody help me with this please?

I have just bought a new Plasma TV (LG 50PV350T), Q Acoustics 2000 Cinema speakers and an Onkyo TX-NR609.

Everything is ok for movies but I cannot seem to connect the TV to the amp for sound.

I have used a pair of RCA analogue cables from the TV output at the back into the amp's Cable/SAT connection and have also tried to asign the correct input on the amp's menu, but still no luck.

Am I missing something here?

Thank you for your help in advance.

 

[Cofnchtr]

Hi,

Have you checked in the menus that you don't have to enable the sound output from the TV to an amplifier? I had a Sony that required this before any sound was output over the line out.

Edit: Checked online for a manual but cannot match up the model number - I have found an LG 50PT350 - this TV only has an optical out - no analogue. Can you confirm the model number (or find your TV on the LG www site and post a link here).

Cheers,

Cofnchtr.

 

[JJ]

Hi,

Thank you for taking the time to respond to my query.

This is the link to my TV: http://www.lg.com/uk/tv-audio-video/televisions/LG-plasma-tv-50PV350T.jsp

I have seen if there is a function in the TV menu to enable sound to the amp but cannot find any.

Thank you.

 

[Cofnchtr]

Hi,

From what I can read on the link you gave, your TV is the same as the one I mentioned in that it has a digital audio out which requires an optical lead to connect from the TV to the amp. Under the 'Jack pack (rear)' heading.

This lead is also known as a Toslink cable. There are various brands available from most hi-fi stores. Connect that and you should be good to go.

If there's still no sound, look for a menu listing to turn the TV speakers off. This should enable the digital output on the rear of the TV.

Enjoy 🙂

Cheers,

Cofnchtr.

 

[Andrew Everard]

Looks like those analogue sockets are audio inputs for use when a video connection that doesn't also carry audio - eg component video, etc - is used to feed the TV. The solution would seem to be the optical connection from the TV to the receiver.

 

[JJ]

Thank you both for your help and guidance. I have now ordered a Toslink cable.

 

[JJ]

Gentlemen,

The cable arrived today and all I had to do was plug it in at both ends and everything works fine now. I did not even need to assign anything as the TV picked it up immediately.

Many thanks again for your help.