cannot get optical input to work on denon avr 1713

toyota man

New member
Apr 22, 2009
79
0
0
Hi all I have just connnected my panasonic gt42 via optical cable to my denon avr 1713 amp and it isn't working I can see the red light of the laser projecting out of the interconnect but no mater what input I select it makes no difference ie no sound many thanks for any help with this one I am not realy that ofay with av
 
BenLaw said:
Have you taken the plastic caps off the interconnect and got a firm connection at each end?
Yes I have tried all the sort of things which you kick your self for .the manual that came with the amp is next to useless unless you need something to level a bookcase or light a fire . hows you young son and good Lady well I hope christmas will be good this year and for many years to come🙂 🙂
 
:grin: Other than that (I didn't take the cap off once, which is why I suggested 😉 ) make sure settings are correct for output in TV and input in amp.

We're all really well, thanks for asking 🙂 Baby boy has recently started sitting up and is a little delight:

I hope you and your family are doing well also and that you have a great Christmas 🙂

(Hmm, can't get the image to display using my phone, I'll try again if I remember. Thanks again.)
 
Hey there,

not sure if you successfully resolved you issue yet, but I had a similar problem, everything was set up correctly, I could see the red light from the cable but the AVR did not register anything..

The solution was very simple, a new cable was needed. Apparently, seeing the red light indicates next to nothing. 😀

My cable was treated well and was maybe 3 years old. I also never heard of an optical cable gone bad, but that is just what happened.

Hope this helps.

Martin
 

TRENDING THREADS

Latest posts