- Aug 10, 2019
- 2,556
- 5
- 0
Hi all
I have a couple of questions.
My current setup consists of a Marantz PM7001 stereo amp, Audioquest Indigo+ cables biwiring to B&W CM8.
The cables are from 1999.
Its not that im not satisfied with my current speaker cables, they are just very rigid and not very handy. (They are comprised of 8 solid core wires, 4 thin, 4 thick).
So i was thinking about buying some new cables, with banana plugs for convenience.
The ones i have in mind currently are the QED Revelation with QED Airloc plugs 2-2, so no biwire.
So my questions:
1) Do people in general biwire their B&W speakers, particularly the CM range? (Also since B&W mentions themselves in the manual that you could gain some benefit from this).
2) QED Revelation singlewired vs my current Audioquest Indigo+, quality improvement or not?
3) In case i dont biwire, how good quality are the "brass/gold plated" brackets/straps that come with the speakers, and would i benefit from replacing them with cable jumpers, even if unterminated?
Something like: http://www.hificables.co.uk/12109/Qed-XT300-X-Tube-Jumper-Cable.html
I could also just cut some from my existing cables, but i think it will be too rigid for jumpers.
I havent tried to see if i can see a difference if i singlewire the Audiioquest cables yet, but will try it.
Im well aware that i may not see any difference at all, its more about convenience and going by the "better safe than sorry" by buying some good quality cables.
Other suggestions are welcome ofc.
I live in Denmark but was thinking of buying the cables in a UK store, for the QED ones i can save around 30% of the danish price.
Have found these 2 stores which seems good:
http://www.hificables.co.uk/
http://www.futureshop.co.uk/index.php
I have a couple of questions.
My current setup consists of a Marantz PM7001 stereo amp, Audioquest Indigo+ cables biwiring to B&W CM8.
The cables are from 1999.
Its not that im not satisfied with my current speaker cables, they are just very rigid and not very handy. (They are comprised of 8 solid core wires, 4 thin, 4 thick).
So i was thinking about buying some new cables, with banana plugs for convenience.
The ones i have in mind currently are the QED Revelation with QED Airloc plugs 2-2, so no biwire.
So my questions:
1) Do people in general biwire their B&W speakers, particularly the CM range? (Also since B&W mentions themselves in the manual that you could gain some benefit from this).
2) QED Revelation singlewired vs my current Audioquest Indigo+, quality improvement or not?
3) In case i dont biwire, how good quality are the "brass/gold plated" brackets/straps that come with the speakers, and would i benefit from replacing them with cable jumpers, even if unterminated?
Something like: http://www.hificables.co.uk/12109/Qed-XT300-X-Tube-Jumper-Cable.html
I could also just cut some from my existing cables, but i think it will be too rigid for jumpers.
I havent tried to see if i can see a difference if i singlewire the Audiioquest cables yet, but will try it.
Im well aware that i may not see any difference at all, its more about convenience and going by the "better safe than sorry" by buying some good quality cables.
Other suggestions are welcome ofc.
I live in Denmark but was thinking of buying the cables in a UK store, for the QED ones i can save around 30% of the danish price.
Have found these 2 stores which seems good:
http://www.hificables.co.uk/
http://www.futureshop.co.uk/index.php