Advice before using YPAO

near dark

Well-known member
May 5, 2009
140
0
18,590
Visit site
Hello.

Im looking for some advice before using the YPAO ,to calibrate my Yamaha AV Amp please .

I have owned the Amp for over a year,and have adjusted the sound by hear.

My equipement is ...

Yamaha RX-V675

Mission MX1 x 4

Mission MX-C1 Centre

Tannoy SFX 5.1

SONY Blu Ray BDP-7200

Thank you
 

RobinKidderminster

New member
May 27, 2009
582
0
0
Visit site
What advice do u need beyond the manual? When its done adjust the speakers to small and 80hz crossover as a starting point. Personnally I use it just for distance etc and then turn off all processing. Ignition have a sub you may need to add a metre or so to compensate since the sub calibration is less accurate.
 

near dark

Well-known member
May 5, 2009
140
0
18,590
Visit site
RobinKidderminster said:
What advice do u need beyond the manual? When its done adjust the speakers to small and 80hz crossover as a starting point. Personnally I use it just for distance etc and then turn off all processing. Ignition have a sub you may need to add a metre or so to compensate since the sub calibration is less accurate.

Hello,

And thank you for the help. I thought maybe some info regarding my current settings,may assist ?.

Power Amp Assign Basic

All speakers set to small

Distance,I set these myself

All speakers are set to 0.0dB

Parametric EQ=Through

Whats does 'turning processing off achieve' ?

Thanks
 

TRENDING THREADS

Latest posts