• If you ever spot Spam (either in the forums, or received via forum direct message) please use the Report button at the bottom of each post to make sure a Moderator can handle it quickly. Thanks for your help in keeping things running smoothly!

Signal quality issues with addition of a preamp.

MellowYellow

Active member
Jan 28, 2021
2
1
25
Hi, new to the forum, have a pretty basic system Project elemental TT, Audioromony valve amp coupled with a pair of Epos M16 floor standing. Just put on an AT3600, can’t believe the improvement, just added a project phonobox and it’s absolutely destroyed the signal quality...any ideas??
 

Gray

Well-known member
Nov 27, 2015
1,518
944
12,570
Hi, new to the forum, have a pretty basic system Project elemental TT, Audioromony valve amp coupled with a pair of Epos M16 floor standing. Just put on an AT3600, can’t believe the improvement, just added a project phonobox and it’s absolutely destroyed the signal quality...any ideas??
Sounds like you might be connecting the output of the phono box to a phono and not a line input on your amp.
(Or putting the MM cartridge into the MC input on the Phono box).
 
Last edited:

MellowYellow

Active member
Jan 28, 2021
2
1
25
Thanks guys for the help and support, the project has a built in phono stage so took off the add on and works fine...really pleased.
 
  • Like
Reactions: Gray

ASK THE COMMUNITY

TRENDING THREADS