Question IMPEDENCE.

ianrjones

Well-known member
Aug 31, 2023
94
63
620
Hello everybody.
It's something I know next to nothing about. I have the opportunity to purchase; NEAT ACOUSTIC ULTIMATUM XLS used speakers.
My problem is this; they are 6 ohms average, minimum 4 ohms. The amp I am currently suffering with is the YAMAHA as701.
Which is 8 ohms. the amp I will replace it with will also be 8 ohms. So here is my question (at last), are they compatible ?
or is it a no-no?
P.S. apologies to NOPIANO, whom I insulted some time ago, no excuses.
Thanks in advance,
IAN.
 
Thanks AL, The amps I am considering for next year, (JAN-SALES) are the LUXMAN Z series. 505Z, 507Z or the 509Z. To be realistic, waiting for one used or ex display will be highly competitive, with hundreds of bidders. So I believe I will have to buy new.
THANKS,
IAN.
 
This is about the power reserves of the amp. At 4 ohms the speakers will take more current as there is lower impedance to the voltage the amp creates. Similar relationship to the familiar formula V=IR between resistance voltage and current for DC.

Amps SHOULD have indicated power into 8 ohms and 4 ohms. Hence my amp the Roksan K3 is rated at 140 watts per channel into 8, and 220 into 4 - the higher figure into 4 reflecting the fact that the current is going to be higher.

And behold - looking at the Luxman specs, the 505Z says "100W+100W (8Ω) and 150W+150W (4Ω)" which implies that they have anticipated different loads and given it a power supply adequate to the task.
 
Thank you gentlemen. How about A+B speakers when one pair is 8ohms, and the other is 4 ohms? I'm not trying to wind you up, I really need to know, before I make a purchase.
Thanking you.
IAN.
 
I'm surprised the Luxman only outputs an extra 50% into 4ohms - most well designed amps with a stable power supply will double their output when the impedance halves.

Only discovered recently that Luxman is part of the IAG group. Back to topic I don't think the Luxman would have trouble driving the speaker anyway.
 
I'm surprised the Luxman only outputs an extra 50% into 4ohms - most well designed amps with a stable power supply will double their output when the impedance halves.
Not necessarily so. Most I've seen (see my Roksan) don't quite make it. I guess it's just value for money calculations - 220W should be enough, this side of an Oasis gig PA. I've never had my amp much beyond nine o'clock on my (nominally 8 ohm) speakers. On the grounds I'd like to keep my windows from blowing out.

In reality these max power stats are about having the headroom to handle transients. And if your amp is rated higher than your speakers, then you'd be fine on that score. Provided you don't turn it up to 11.
 
Thank you gentlemen. How about A+B speakers when one pair is 8ohms, and the other is 4 ohms? I'm not trying to wind you up, I really need to know, before I make a purchase.
Thanking you.
IAN.
Should still be fine unless you turn the dial to max before switching to the 4 ohms - in which case you would have other problems like speakers jumping through the ceiling.

If the amp drives A or B, then you'd just need to adjust volume when switching.

If A and B (not sure why you'd do that as you'd have different volumes on the two) the amp would see a blended impedance of 2 and a bit ohms* (careful with that dial, Eugene) but send twice the amps to the 4 ohms as the 8 ohms hence the volume disparity.

*1/R = 1/R1 + 1/R2
 
  • Like
Reactions: Jasonovich
How about A+B speakers when one pair is 8ohms, and the other is 4 ohms?
The impedance the amp sees will always be lower than the lowest parallel impedance.

And don't forget that, in use, the actual impedances will, at times dip below your 8 and 4 ohm figures.

Manufacturers provide connections for a second pair of speakers as a convenience feature - but I'd never be running more than one pair at a time.
 
  • Like
Reactions: Jasonovich
Thanks AL, The amps I am considering for next year, (JAN-SALES) are the LUXMAN Z series. 505Z, 507Z or the 509Z. To be realistic, waiting for one used or ex display will be highly competitive, with hundreds of bidders. So I believe I will have to buy new.
THANKS,
IAN.
Hi Ian,

Neat Ultimatum XLS are very very good speakers with high resolution. Luxman amps from Z line are excellent choices for them. I will only add, Neats sound also very good with Naim Audio Nait amps and Rega Aethos will be excellent match as well. Lot of good possibilities.
BR. Juraj
 
  • Like
Reactions: ianrjones
Thanks for your input, time is on my side. Your new advice is certainly welcome. I am notorious at planning ahead for every item. In 5 years I will have a tube pre-amp and a pair of ss mono blocks. And I am honestly checking out the waters these days. Like I always say the future is promising, I believe it just gets better + better.
This is a cool site.
 
  • Like
Reactions: Al ears
Thanks AL, The amps I am considering for next year, (JAN-SALES) are the LUXMAN Z series. 505Z, 507Z or the 509Z. To be realistic, waiting for one used or ex display will be highly competitive, with hundreds of bidders. So I believe I will have to buy new.
THANKS,
IAN.
Can't go wrong with a Luxman. Wish I had one, wish I had £8k to spend on one....
 
Last edited:
You would think that, but I estimate about 75% of amps don't, or it is not even mentioned, hence the requirements for measurements when reviewing is of vital importance.

Bill
Implying the Luxman isn't well designed might be an indication he doesn't stock them.... 🙂
In fact reviews of the 507z show 110 into 8ohm and 210 into 4ohm.....
 
Hello everybody.
It's something I know next to nothing about. I have the opportunity to purchase; NEAT ACOUSTIC ULTIMATUM XLS used speakers.
My problem is this; they are 6 ohms average, minimum 4 ohms. The amp I am currently suffering with is the YAMAHA as701.
Which is 8 ohms. the amp I will replace it with will also be 8 ohms. So here is my question (at last), are they compatible ?
or is it a no-no?
P.S. apologies to NOPIANO, whom I insulted some time ago, no excuses.
Thanks in advance,
IAN.
Uhm the Yamaha is stable down to 2 Ohms. So no, you're not suffering and your Yamaha is doing tremendously. Delivering 140W into 8 Ohms, 230W into 4 Ohm and 340W into 2 Ohm at 1% Max THD

Review - https://www.audiosciencereview.com/.../yamaha-a-s701-stereo-amplifier-review.55211/
 
Last edited:

TRENDING THREADS