fitting a 2mm shim to a rega rb330

[andybebbs]

hi guys can someone tell me the process of fitting a shim to a rega rb330 arm, is it easy or complicated.

 

[Al ears]

Never done it on the new 3 point mount but have on the older RB250.
You will need to be able to realign the tonearm afterwards as I believe you need to remove it to fit shims

 

[andybebbs]

https://blog.son-video.com/en/2019/12/review-rega-planar-3/

 

[daytona600]

the Technics way - turn height adjust done in seconds

 

[Gray]

the Technics way - turn height adjust done in seconds
View attachment 2208

No doubt he will be pleased to see that 🙄

 

[Al ears]

No doubt he will be pleased to see that 🙄

pointless really and nothing to do with this thread.

 

[andybebbs]

all good daytona600 🙂 but my turntable does not have one hence the question fitting a shim.

 

[andybebbs]

anyway fitted my at vm540ml cartridge without a shim and so far all seems good but i might still put some 1mm washers under the tonearm fixing screws to move it up slightly. I can`t go up much more than that as the tonearm weight will hit the lid.