Can anyone suggest the best way to upgrade the kef KHT3005 SE av speaker package to a 7-1 system I would like to add left and right floor stand speakers and use the existing front left and right speakers for the front high mode, I have a onkyo TX-NR809 amplifier
-
Direct messages between forum members have now been disabled. - Get all the details here.
Upgrading kef KHT3005SE
- Thread starter admin_exported
- Start date
The latest edition of WHFSV has same question in the readers' questions - the mag suggests adding Q Acoustics 2050i floorstanders to an existing KEF surround system.
Frank Harvey
Well-known member
- Jun 27, 2008
- 567
- 1
- 18,890
That, I could understand if it was a Q Acoustics 5.1 system...
KEF's UniQ design has different dispersion characteristics to most loudspeakers due to the coincident nature of the drive units (treble unit set in the middle of the mid/bass driver). Because of this, I'd look at the Q500's.
I would also highly recommend changing the centre to the Q200c too - the front three speakers are the most important as they're producing the majority of what you hear, and are setting the initial soundstage (everything that happens on the screen).
KEF's UniQ design has different dispersion characteristics to most loudspeakers due to the coincident nature of the drive units (treble unit set in the middle of the mid/bass driver). Because of this, I'd look at the Q500's.
I would also highly recommend changing the centre to the Q200c too - the front three speakers are the most important as they're producing the majority of what you hear, and are setting the initial soundstage (everything that happens on the screen).
Similar threads
Facebook
Twitter
Instagram