sub woofer settings

[steakers]

not sure im posting in the right place , id like to get my settings right on my sub , ive used audessey to set up my speakers , as for the sub what should the phase and crossover be set to , ive set the crossover for all speaker to 90 , does this mean i need to set the sub cross over to 90 aswell . any tips most welcome.

cheers

 

[robinkiddie]

What is your kit? If your amp is set to 90hz, set yr sub to max (200+) since the amp deals with crossover and sends no signal above 90. Positioning? Google will recommend the 'crawl' although in practice most of us have limitations on position.

 

[michael hoy]

Would be easier to reply if we knew the make and model of the sub, do you have the manual for the sub.

 

[steakers]

sorry the subs part of my Qacoustics 2000i 5.1 kit , ive had to position the sub to the side of the settee due to partner limitations , out the way basically but not in a corner . im using a Denon avr x2000 A/V amp aswell.

 

[michael hoy]

sorry the subs part of my Qacoustics 2000i 5.1 kit , ive had to position the sub to the side of the settee due to partner limitations , out the way basically but not in a corner . im using a Denon avr x2000 A/V amp aswell.

OK,

You should have the switches etc as per below.

Use the recommended settings below.

Let your amp do all the rest.

 

[steakers]

thanks will try later ,