protection mode

steakers

New member
Jan 28, 2011
102
0
0
Visit site
my amp suddenly cuts out and goes into protection mode , whats the cause of this ive not touch anything of late on the amp or moved any wires , whats the simpilist way to fix this issue.
 

Frank Harvey

Well-known member
Jun 27, 2008
567
1
18,890
Visit site
If its a case of asking the receiver to do too much, you'll have to play at lower volumes.

Does it do it during movies, or does it do it randomly, even when nothing is being played though it? If its random even when not in use, unplug all interconnecting cables and speaker cables and see if it still cuts out when it's only plugged into the mains. If it does, it's an internal problem.

One thing you could try - what is the crossover frequency for your sub? If its low (40-60Hz for example) try upping it to about 80Hz. If its already around the 80Hz mark, try 100Hz. Impedance generally drops at lower frequencies, so you'll be easing the load on your receiver. If it still does it, you'll need something more powerful.
 

steakers

New member
Jan 28, 2011
102
0
0
Visit site
nice one will give the sub settings a go as tried the other , cuts out when watching movies generally not at high vol normally-22/25 db .

thanks.
 

TRENDING THREADS

Latest posts