PLASMA Setup

  • Thread starter Thread starter pd
  • Start date Start date

pd

Well-known member
Nov 7, 2007
6
0
18,520
What picture settings should I use to run in my New PANASONIC TH42PX80B Plasma?
Also is the running in time about 200Hrs?
Thanx
pd
 
Try this

http://www.hdtvtest.co.uk/Panasonic-TH42PX80/Settings/

Yes 200 hours for peace of mind but many on here have said its no longer an issue.
 
Its what I used on mine and then THX Optimised it later and it needed no changing !
 
FuzzyinLondon:Looks like I'm the parrot today. What he said.

Aarrghh,Fuzzy lad, not only have I given useful info to a new poster, I'v only gone and beaten you to it. Looks like my nominations in the balance.

Off to start a thread on 'Best Tunes To Garden To' to redress the balance
 
high there i m a fully qualified tv installer/ calibrator with regards to hdtv test settings their wrong .

mine were done with a proper colour meter not a d.i.y spyder

cinema mode

contrast - no change

brightness - 1 click left

sharpness - 1 click left hd / no change sd

colour no change

colour temp warm hd / nomal sd

colour managment . off

picture overscan off hd - on sd

------------------------------------------------------------------------------------------------------------------------------

so please ignore vincent with his tv hobby he has over at hdtvtest ,

i do it for a living

about screen burn please dont confuse retention with burn their not the same,

download your self the pioneer break-in disc and ,

set tv up for burn in

normal

set all picture setting to just under half way and run it for a few hours then power it off for 3-4 hours then switch back on and repeat process 5 times

also upgrade the mains cable try russ andrews power max t
 
Surely calibrated settings will vary as they reflect each individuals ambient lighting conditions in their own home. And not all models of the same TVs are identical??
 

TRENDING THREADS