marantz amp and wharfedale speaker compatability problems

admin_exported

New member
Aug 10, 2019
2,556
4
0
Visit site
Just bought a new Marantz PM4001 and today connected it to Wharfedale Diamond 8.3 speakers. Right channel sounds fine but left is terrible, low and tinny sound. Very strange. Have checked all connections but with no joy. Just seen in instructions that the speakers are 6 ohms, and the marantz intructions mention that the amp is only for speakers from 8 to 16 ohms. Is that my problem??
 

Andrew Everard

New member
May 30, 2007
1,878
2
0
Visit site
Try swapping the left and right speaker connections. If the problem moves to the right channel, then it's an amp problem; if it stays on the left then either the cable or the left speaker isn't working properly.
 

TRENDING THREADS

Latest posts