Dali Kupid speakers on my Pioneer a-c5?

Jonah_Lake

Member
Aug 18, 2025
1
0
20
I just had a listen to the new Dali kupid. WOW! I tried it next to the Oberon 1 and 3 but prefered the Kupid. My problem is that it's 4ohm speakers and I have an old Pioneer a-c5.
What problems could appear if I combine these two? Thanks

The A-c5 has these specs:

Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 2Hz to 160kHz

Total harmonic distortion: 0.07%

Input sensitivity: 2.8mV (MM), 200mV (line)

Signal to noise ratio: 85dB (MM), 105dB (line)

Output: 200mV (line)

Speaker load impedance: 4Ω (minimum)

And the Dali speaker:


83 dB @ 1m for 2.83 V
4 Ohm
103 dB
2,100 Hz
2-way
40 – 120 Watt
[td]
Sensitivity​
[/td]​
[td]
Nominal Impedance​
[/td]​
[td]
Maximum SPL​
[/td]​
[td]
Crossover Frequency​
[/td]​
[td]
Crossover Principle​
[/td]​
[td]
Recommended Amplifier Power​
[/td]​
 
the sensitivety is the problem, old speakers were all above 100db´s, and not meaning they were good, but at least sounded as better as they could, buy some cheap 80´s or 90´s Pioneer and you´ll see, CS reference, to 40watts the 140 watts DIN or 190 watts DIN
 

TRENDING THREADS