Direct / remote

[slick76]

On the back of my amp there is direct and remote speaker outputs it an ra 980 bx new to me which or how do i connect to my mission 752s? Cheers

 

[Messiah]

'Direct' is the main connection so use this.

Remote is used for a 2nd set of speakers (say for a 2nd room).

 

[Al ears]

'Direct' is the main connection so use this.

Remote is used for a 2nd set of speakers (say for a 2nd room).

yes. Most manufacturers would simply have called them A and B.....

 

[slick76]

I thought it might have been for bi wiring speakers 752s starting to distort slightly when very loud

 

[Al ears]

I thought it might have been for bi wiring speakers 752s starting to distort slightly when very loud

No. They were designed to run two pairs of speakers originally.

 

[Gray]

On the back of my amp there is direct and remote speaker outputs it an ra 980 bx new to me which or how do i connect to my mission 752s? Cheers

'Direct' on your amp's terminals means just that - that they are unswitched.
Whereas on other amps with two (A and B) outputs, both can be individually switched, your 'speaker remote button' switches only the B output.....the direct pair are permanently connected.

With the remote (B) pair switched in, the two pairs of terminals are connected in parallel to the amp output, so there's no reason why you couldn't use them to bi-wire your speakers - but most people will tell you that there's no audible advantage in doing that.

Bottom line is that, when just using one main pair of speakers:
Doesn't matter whether you connect to A or B output on other amps.
But on yours, you get the 'advantage' of having no switch in series with your direct output.

 

[Gray]

Most manufacturers would simply have called them A and B.....

....when they're both individually switched
But in this case, I think Rotel is making the point that you've got a direct, unswitched option.

(And, let's face it, if you're never going to switch a pair off....who wants a switch?).