Recent content by Slapaham

Sorry Gray, been snowed this week - I will try and find some time over the weekend to look at this! Appreciate your help so far!

So I've gone back in... the block connector is so tight that I'm not hugely keen to take it out unless it's absolutely necessary...(sorry!)... if it is, I'm combat it - just let me know! So this is what I've got... Then with any text I can see near the block connector - I can only read...

Hi Gray, Yes, 3 cables running from a block connector on the PCB - 2 brown and 1 black... all connected to the male GX16-3pin male connector on the mixer. Rubbish photo but maybe it'll help (you can see the 2 brown connections but not the black one that feeds underneath):

Okay, so everything I need has arrived - now that the bit I'm most nervous about - the soldering! Thanks for those tips - I'll try and approach it optimistically as everyone has to start somewhere! As you recommended, I removed the base of the mixer to see what the pinout was... tried to take...

Thanks Gray, Ordered the 16v this morning so will await it's arrival then onto the next stage - that site looks v useful! I will try and look inside the mixer and the connection port when I have a spare minute. I ordered a soldering iron over Christmas and will use this project to cut my...

Just a quick update on this, I found the one you suggested online elsewhere but while I was on their site, I noticed they also had a 16v version - it looks like the same specs other than the voltage being lower: https://www.poweradaptorsuk.co.uk/1000ma_16v_AC_AC_Power_Adaptor_p/pa100016ac.htm...

Thanks Gray - appreciate the help on this. I’ll review everything carefully and then if it all adds up get the power supply ordered. 👍🏻

Thanks Gray, In the meantime, this is what I think may work (based on my novice-level skills) - but correct me if I'm wrong!!: https://www.ebay.co.uk/itm/8-5V-12-6V-16-8V-21V-25-2V-1A-2A-Li-ion-Battery-AC-Charger-Power-Supply-Adapter/174351758311?hash=item28982cb3e7:g:frcAAOSw6uZfER8R 16.8v...

The replacement number for the power supply in the manual for the mixer is also PS-16Uk which seems to confirm 16v

Haha, does seem that way, right? They are at least making me work very hard to figure this out. Nothing on the mixer itself... more digging online... an Irish auction site has this... and finally managed to find a US version of the PSU... so 16.8v 1A - so ignore what I said about 12v...

Thanks Gray. It seems very hard to find the power supply or any reference to it online. The only way I can see power supplies for this unit is by searching completed items on eBay. Strangely, a lot of these mixers are sans-power supply - only 2 had them, so that kind of says it all! This is one...

Hi folks, New to the forum but long time lurker. I bought a mixer a bit blindly late last year... a Standon M303. I made the daft assumption that while it didn't have a power supply, it would be something fairly generic and easily replaceable. How wrong was I! I've looked everywhere but to no...