Netgear Router problem with Sonos, NAS, internet

mattatnotts

New member
Jun 21, 2007
11
0
0
I've just purchased a Western Digital NAS (MyBook 1TB) and Sonos (ZP90). When all are connected to the router (Netgerar WGR614v6), the router crashes and appears to constantly re-boot (lights on front flash every few seconds). The router works fine with each piece of hardware, ie if I disconnect the internet then I can use the NAS, Sonos and laptop happily, and conversely if the NAS is disconnected I can then use the internet.

The fault only seems to appear when both the NAS and internet are connected to the router at the same time.

Can anyone help please!
 
Check that the IP address of the router and the WD NAS (and all other devices you connect to the router) are not the same if you can. Sounds like a configuration issue, but if all checks out try using different Ethernet cables if you have any spare and also update the router and NAS firmware if there are newer version available.

Good luck!
 

TRENDING THREADS