I am fitting a AT95E to my pro-ject genie and connected the tonearm wires to the same pins as the OM3 cartridge that I removed. Although sound is coming out of both speakers, I seem to have lost "stereo" sound. Some of the guitar parts from 'Can you hear me knockin' by the Rolling Stones have practically disappeared. Please help!!!!
Installing AT-95 cartridge pin ID. Please Help!!!!
- Thread starter mattatnotts
- Start date
DistortedVision
Well-known member
I'm not familar with that Audio Technica cartridge but the pins should be colour coded to match the cartridge leads.
The pins are ID'd with L and R + and I found the following after a google search for tonearm wiring colours:
Red - Right +
White - Left +
Blue - Left -
Green - right -
Panic over, I think.
Red - Right +
White - Left +
Blue - Left -
Green - right -
Panic over, I think.
DistortedVision
Well-known member
If you've got the Hi Fi News Test Record its got a phase test track on it to check you've connected it correctly.
Looking at the cartridge from the back, red top right pin, white top left, green bottom right and blue bottom left.
Facebook
Twitter
Instagram