AVI DM10 Driver

[Csw1984]

Hopefully some AVI owners may be able help me here - I've got ADM9RS and just wondering if the DM10 driver can be fitted/viable/available from the likes of Falcon Acoustics and other places or was it only made for AVI?

Many thanks.

 

[nopiano]

You are probably on the right lines, as Falcon or Wilmslow Audio should have the relevant driver, or be able to ID it.

A bit of Googling might find some threads on the defunct forum that AVI used to host.

 

[Roger_A]

I suggest you try searching the threads on hddaudio.org which will give details of changes between the 9 and 10 series and there are several members on there who have tried swapping drive units from later series. If I recall correctly the biggest difference was to the tweeter which covered down to a lower frequency so the crossover point was different. The bass/mid driver was also different but I can't remember to what extent and as the crossover was different I'd be wary of changing as it may not have been designed to cover as wide a frequency range as the one in the 9 series. However, it's worth asking on the above link. Note that most of those changing drivers were doing so with the tweeter rather than the bass/mid.

 

[Csw1984]

Cheers.

I did look over at hddaudio but saw hardly activity but will post.

Thanks again.

 

[nopiano]

Cheers.

I did look over at hddaudio but saw hardly activity but will post.

Thanks again.

I think it’s history, I.e. closed. Like AVI themselves. But the old posts from Ashley probably reveal the background.