• If you ever spot Spam (either in the forums, or received via forum direct message) please use the Report button at the bottom of each post to make sure a Moderator can handle it quickly. Thanks for your help in keeping things running smoothly!

2 arcam power amps together....advice please

bobchiba

New member
Mar 16, 2008
41
0
0
Currently im bi amping with an alpha 8r on highs and a delta 290p on lows. I might get the chance to get a second 290p for not alot of money. So.... question is, I dont think there would be much merit in adding it to take over from the alpha doing the highs, and let the aplha act as a pure pre amp would there? I was thinking the best way would be to use the alpha as a pure pre, and give each speaker a 290p. Is this possible with the 290p, Im under the impression they can be used as a sort of mono-block with the tiny connectors they come with? ... how would I want to wire everything?

Any advice much appreciated.
 

Andy H

New member
Nov 14, 2007
37
0
0
I'm pretty sure it can be done. Check out the Arcam web site they have lots of archived manuals on there. Hope this helps.
 

Andrew Everard

New member
May 30, 2007
1,878
0
0
You can just daisy-chain the 290Ps using the preamp output on the first power amp to the inputs on the second one.

But I think the limiting factor in such a system will be the quality of the 8R as a preamp. You might want to consider a better preamp as a next step - an Alpha 9C would be the obvious choice if a) you want to keep it all-Arcam and b) you can find one.
 

ASK THE COMMUNITY

TRENDING THREADS

Latest posts